Skip to content
Glossary

What Is Backfeed?

Backfeed is a flow of electricity that travels toward a source or along a path opposite its usual direction. It can happen when a backup power source sends electricity into a home's wiring. That flow may be planned, or it may reach wires where it isn't expected.

Quick Facts About Backfeed

Category
Electrical power flow
Used for
Backup power systems
Common confusion
Not always a fault
Also called
Electrical Backfeed
Often discussed with
Bidirectional EV backup-power installation

Key Takeaways About Backfeed

  • Backfeed isn't always a fault.
  • A power switch can separate a home from utility lines.
  • A charger alone doesn't always supply backup power.

How Backfeed Works

Hands connect a labeled backfeed cable to an outdoor electrical panel

Backfeed depends on where a power source connects to the wiring. A home normally draws power from the utility through its electrical panel. A backup source can send power toward that panel through a connected path. Related service: Bidirectional EV backup-power installation.

Related glossary terms: Transfer Switch, Electrical Panel, Critical Loads Panel.

A transfer switch is a device that changes a home's power source. It can separate the home from utility lines while backup power serves the home. The path depends on the design of the switch and the backup system.

An electric vehicle battery stores power as direct current, or DC. Home wiring uses alternating current, or AC. A device called an inverter changes DC into AC that home wiring can use.

Some backup systems feed a separate panel for selected home circuits. A circuit is a path that carries power to outlets or equipment. The system's design determines which circuits receive backup power.

A hand inserts a wire into a wall-mounted electrical box labeled BACKFEED outdoors

From the Center Electric Service team

When we plan EV backup power, we check how the car's equipment connects to the home. We look at how the system separates the home from utility lines. We also check which home circuits the backup system will serve.

Backfeed in Practice: A Real-World Example

A Riverside homeowner wants an electric vehicle battery to power lights during an outage. The backup system sends power through the home's wiring after a switch separates the home from utility lines.

Related Terms

Transfer Switch

A transfer switch is a device that changes which power source feeds a home or part of it.

Electrical Panel

An electrical panel is a box that divides incoming power among circuits in a building.

Critical Loads Panel

A critical loads panel is an electrical panel that holds circuits selected for backup power.

Branch Circuit

A branch circuit is a set of wires that carries power from a circuit breaker or fuse to electrical devices.

Center Electric Service

Have Questions About Backfeed?

Contact Center Electric Service for practical guidance on Backfeed and related 24 hour electrician work in Riverside.

(951) 577-3540