What Is Amperage?
Amperage is a measure of the electric current flowing through a wire or device. Electric current is the flow of electric charge. Amperage tells you how much charge moves through a point over time. Electricians use amps, the units of current, to describe that flow.
Quick Facts About Amperage
- Category
- Electric current measure
- Used for
- Describing current flow
- Common confusion
- Current flow versus breaker rating
- Also called
- Current, Electric current
- Often discussed with
- Electrical Panel Upgrade
Key Takeaways About Amperage
- Voltage is electrical pressure, not current.
- A panel has a limit on the load it can carry.
- A breaker's rating isn't the current always flowing.
How Amperage Works

Amperage changes as devices draw more or less current. A lamp draws current when you turn it on. The current stops when you turn the lamp off. Related service: Electrical Panel Upgrade.
Related glossary terms: Electrical Load, Electrical Panel, Circuit Breaker.
Voltage is the electrical pressure that helps push current through a path. The path also affects how much current flows. A meter can measure the current in that path.
An electrical panel sends power to circuits throughout a home. Each circuit is a path that carries power to devices. A breaker is a switch that helps protect that path from too much current.
A breaker has an amp rating, but the current can be lower. The rating describes the breaker's limit, not a constant flow. A panel also has a rating for the load it can handle.

From the Center Electric Service team
When we plan a panel upgrade, we check the home's electrical load. That means we look at the power its devices need. We also check the panel and service wires before choosing equipment for the job.
Amperage in Practice: A Real-World Example
A homeowner wants a panel upgrade before adding a car charger. The electrician checks the home's load and the new charger's needs to help choose a suitable panel.
Related Services
Related Terms
Electrical Load
An electrical load is a device that draws power from an electrical system, or the power the device draws.
Electrical Panel
An electrical panel is a box that divides incoming power among circuits in a building.
Circuit Breaker
A circuit breaker is a switch that cuts off power when too much current flows through an electrical circuit.
Load Calculation
A load calculation is a method for estimating how much electrical power a building or part of a building may need.
Center Electric Service
Have Questions About Amperage?
Contact Center Electric Service for practical guidance on Amperage and related 24 hour electrician work in Riverside.
