Skip to content
Glossary

What Are Flickering Lights?

Flickering lights are lights that change in brightness or blink without a switch being used. The change may be easy to see or hard to notice. It can affect a lamp, a ceiling light, or other lights in your home. The pattern can offer a clue to the cause.

Quick Facts About Flickering Lights

Category
Lighting problem
Applies to
Lamps and fixed lights
Common confusion
A steady dim setting
Also called
Blinking lights
Often discussed with
Lighting Repair, Electrical Troubleshooting

Key Takeaways About Flickering Lights

  • The flicker may affect a single light or spread through your home.
  • Notice whether the flicker follows use of a large appliance.
  • A dim setting isn't the same as an unwanted flicker.

How Flickering Lights Works

A close-up shows a worn metal screw holding a black cable against a wooden surface

Flickering lights can result from a change in the power reaching a light. A poor contact inside a lamp can interrupt that flow. The light may blink as the contact breaks and reconnects. Related service: Lighting Repair.

Related glossary terms: Voltage Drop, Electrical Load, Branch Circuit.

A dimmer controls brightness by changing the power sent to a bulb. Some bulbs don't work well with certain dimmers. That mismatch may show up at a low setting, while the light stays steady at a brighter setting.

A change in power elsewhere can also affect a light. For example, a large appliance may draw power when it starts. Lights on the same circuit (a path for power) may briefly dim. A pattern across lights in separate rooms points beyond a single bulb.

Two electricians inspect wiring under a ceiling light fixture in a room

From the Center Electric Service team

When we check flickering lights, we ask where the flicker appears and what else is running. We use those details to guide our lighting repair checks. A light that flickers at every dimmer setting may need a different check than a light that flickers only at low brightness.

Flickering Lights in Practice: A Real-World Example

A kitchen ceiling light flickers when the dimmer is set low. During a lighting repair visit, the electrician checks whether the bulb and dimmer work well together.

Related Terms

Voltage Drop

Voltage drop is a loss of electrical pressure along a wire when current flows.

Electrical Load

An electrical load is a device that draws power from an electrical system, or the power the device draws.

Branch Circuit

A branch circuit is a set of wires that carries power from a circuit breaker or fuse to electrical devices.

Neutral Wire

A neutral wire is a wire that carries electric current back from a device toward the power source.

Center Electric Service

Have Questions About Flickering Lights?

Contact Center Electric Service for practical guidance on Flickering Lights and related 24 hour electrician work in Riverside.

(951) 577-3540